Growing a Windowsill Garden: How to create a DIY Propagator Reusing Household Waste

Are you new to gardening, looking to sow your first seeds? Or an experienced gardener with some extra seeds you can't wait to grow? Then we've got an exciting DIY project for you.

What is a propagator? 

A propagator is like a mini incubator, but made of plastic. It's used to provide young, vulnerable seedlings with a warm, constant environment, giving each seed a much better chance of survival. 

Why make your own DIY seed propagator? 

While spending more time at home, we've soon realised how large our plastic consumption is. We're very aware of our total daily intake and, even though we all do our bit to recycle, we were keen to find a way to reuse plastic packing. 

 DIY Propagator - How To

what you'll need for a diy propagator

1 - What you'll need:

Seed Trays - We opted for yogurt pots. The plastic will hold well in water and is easy to pierce drainage holes in.

Water Tray - We decided to use a butter container. It happens to be the perfect width to suspend our yogurt pots in water from. 

Transparent Roof - We've used some left over clear grape and blueberry punnets. On one punnet, we've sealed the ventilation holes for added warmth, and the other, we've kept these in.

Compost - We've gone for a peat free, general purpose compost

Seeds - We opted to use Tumbling Tom Tomatoes and Crystal Lemon Cucumbers

Other bits - A screw or equivalent for piercing holes in the yogurt pots and some tape if you'd like to tape up your vents.

Step by step guide. 

2 - How to make your DIY propagator

It's really simple to make.

  • Use the screws to pierce a few drainage holes in the bottom of your yogurt pot and tape up any unwanted vents in the punnets (from the inside and the outside to remove any exposed sticky bits).
  • That's it, you're ready to plant.

How to make a DIY propagator

 

How to plant your DIY propagator.

  • Fill your yogurt pot with compost, making sure you break up any clumps. 
  • Using your finger, create a small well in the compost at the seed's instructed depth and distance apart.
  • Drop a single seed into each well created and gently tap the side of the yogurt pot, allowing the compost to loosely fall over the seed.
  • Fill the butter container with enough water to covers the bottom of the yogurt pots, allowing the compost to draw up water, and place the planted yogurt pot onto of the butter container.
  • Position in a bright, sunny, warm window - this step is really important!
  • Wet the top of the seeds to allow them to bed in. If you don't have a gentle watering can, you can pierce some additional holes into a bottle lid and gently squeeze it over the seeds.
  • Then add the lid on top and your DIY propagator is ready.  

How to plant a DIY propagator

 

Seeds can take a few days to germinate. Ours will take between 7-10 days, but we'll be sure to post updates on this blog and our Instagram to show you the progress. 

Tag us in your DIY propagators using #GardenesqueGarden ! We'd love to see how we've inspired your green fingers. 

Want to find out about the advantages of clay pots vs plastic? Click here to read the blog.

Leave a comment

All comments are moderated before being published